Economy

Description: Sensor Coiled Harness Features: Connects main PC board to back and tilt position sensors Includes two loop clamps 7 conductor cable, black jacket All connectors...

Description: Capacitor Specifications: Size: 2.79" x 1.79" x 3.88" 35 uF; 370VAC, 50/60 Hz Quad 1/4" tabs For use with Midmark Models 411, 411(75L), 419, 75L(411) & Evolution 75 Midmark Part Number:...

Description: Base Actuator Features: Includes: limit switch, four 12" cable ties, one 8" cable tie, and one tube of threadlocker Specifications: 3.2A @ 115VAC For use with Midmark Model...

Description: Strain Relief Bushing Specifications: Sold as a pack of 3 Accommodates .425" to .475" diameter round cords Mounting Hole: 7/8" For use with Midmark Models 411, 416 & 417 Midmark Part...

Description: Threadlocker Features: Prevents rust and corrosion Begins to cure at approximately 10 minutes Permanent locking and sealing adhesive Specifications: Midmark Part Number:...

Description: Limit Switch Specifications: 11A @ 125/250 VAC; SPDT 3/16" tabs For use with Midmark Models 414 & 417 Midmark Part Number: 015-0635-00 ACTUAL PRODUCT & COLORS MAY VARY FROM WHAT IS...

Description: Hand Control Panel Features: Metal backing plate Specifications: Size: 2.16" x 6.61" For use with Midmark Models 414, 416 & 417 Midmark Part Number: 015-0546-00 ACTUAL PRODUCT & COLORS...

Description: Power Cord Features: Includes one strain relief bushing, four 8" mounting hole cable ties, six 8" cable ties, connector housing with three crimp terminal, one #10 ring terminal, and two...

Description: Capacitor Specifications: Size: 1.44" diam x 3.38" L 36 - 43 uF; 330VAC Dual 1/4" tabs For use with Midmark Models 411, 411(75L), 414, 416, 417, 418, 491, 75L(411) & Evolution...

Description: Foot Control PC Board Specifications: For use with Midmark Models 414, 416 & 417 Midmark Part Number: 015-0568-01/ 002-0347-05 ACTUAL PRODUCT & COLORS MAY VARY FROM WHAT IS SHOWN

Description: Hand/Foot Control PC Board Specifications: For use with Midmark Models 414, 416 & 417 Midmark Part Number: 015-0568-00 ACTUAL PRODUCT & COLORS MAY VARY FROM WHAT IS SHOWN

Description: Base Actuator Features: Includes four 12" cable ties, one tube of threadlocker, and three 1/4" male QC terminal Specifications: For use with Midmark Models 414 & 417 Midmark Part...

Description: Back & Tilt Actuator Features: Includes two 12" cable ties, two 14" cable ties,  and three 1/4" male QC terminal Specifications: For use with Midmark Models 414, 416 & 417 Midmark...

Description: Seat Actuator Features: Includes two 12" cable ties, two 14" cable ties, one tube of threadlocker, and three #6 spade terminal Specifications: For use with Midmark Models 413 &...

Description: Base Actuator Features: Includes two 12" cable ties, two 14" cable ties, one tube of threadlocker, and three #6 spade terminal Specifications: For use with Midmark Models 413 &...

Description: PC Board Features: Includes mounting hardware Specifications: For use with Midmark Models 405, 411, 411(75L), 419, 75L(411) & Evolution 75 Midmark Part Number: 015-1291-00 ACTUAL...

Description: Back Actuator Kit Features: Includes: back actuator, two cable ties, two 1/4" female flag terminals, one 1/4" male QC terminal and one tube of Threadlocker Specifications: Current...

Description: Brake & Coupler Kit Features: Includes: brake, rubber mounting cup and motor coupler

Description:Coiled CordFeatures: 4 conductor cable RJ-22 connectors Black jacketSpecifications: Fits: Hand Control Length: 12 ft. For use with Midmark Chair/Table Models: 405, 411 &...

Description:Bottom End CapFeatures: Includes: bottom end cap and mounting hardware Black plasticSpecifications: Fits: Hand Control For use with Midmark Chair/Table Models: 319, 405, 411,...

Description:Top End CapFeatures: Includes: top end cap and mounting hardware Velcro attachmentSpecifications: Fits: Hand Control For use with Midmark Chair/Table Models: 319, 405, 411,...

Description:Top End CapFeatures: Includes: top end cap and mounting hardware Clip-on attachmentSpecifications: Fits: Hand Control For use with Midmark Chair/Table Models: 405, 411 &...

Description:MicroswitchFeatures: Includes: switch and two 3/16" quick disconnect terminalsSpecifications: Current Rating: 15A, 125/250VAC; 1/2A, 125VDC; 1/4A, 250VDC Tabs: 3/16" Fits:...

Description:Power SwitchFeatures: Rocker switch (on - off) Legend: I/O Green lensSpecifications: Current Rating: 20A, 125/250VAC, DPST Tabs: 1/4" Panel Cutout: 7/8" x 1-3/16" ...

Description:Drawer Heater Switch AssemblyFeatures: Includes: switch, cable, two 1/4" male fully insulated QC terminals and two 1/4" female fully insulated QC terminals Illuminated white lens,...

Description:Upholstery Heater Switch AssemblyFeatures: Momentary (on - off) switch Four 1/4" male fully insulated OC terminals Illuminated green lens, 12 VDC lamp Includes mounting...

Description:Foot Control CordFeatures: 8 conductor #18 AWG 19/30 strands Grey TPR jacketSpecifications: Sold by the foot (reel not included) Cord Diameter: 9/16" Max Operating...

Description:Coiled CordFeatures: 8 conductor cable One end of the cord is 12" uncoiled to easily fit through the foot switch case RJ45 connectors with protective boots Black...

Description:Coiled CordFeatures: 8 conductor cable RJ45 connector with protective boot 8 pin Molex connector Black jacketSpecifications: Fits: Hand Control and Foot Control Length:...

Description:Coiled CordFeatures: 18 conductor cable 18 pin connectors Over-molded strain relief Black jacketSpecifications: Fits: Hand Control and Foot Control Length: 14 ft. For...

Description:Coiled CordFeatures: 8 conductor cable RJ45 connectors with protective boots Black jacketSpecifications: Fits: Hand Control and Foot Control Length: 25 ft. For use with...

Description:Control Inlet PC BoardSpecifications: Fits: Chassis Assembly For use with Midmark Chair/Table Models: 411 & Evolution 75 Midmark Part Number: 015-1173-00ACTUAL PRODUCT & COLORS...

Description:PC BoardSpecifications: Fits: Hand Control For use with Midmark Chair/Table Model: 405 Midmark Part Number: 002-0347-06ACTUAL PRODUCT & COLORS MAY VARY FROM WHAT IS SHOWN

Description:PC BoardFeatures: Includes: PC board and mounting hardwareSpecifications: Fits: Hand Control For use with Midmark Chair/Table Models: 411 & Evolution 75 Midmark Part Number:...

Description:Hand Control PanelFeatures: Metal backing plateSpecifications: Size: 2-5/32" x 5-9/16" Fits: Hand Control For use with Midmark Chair/Table Model: 411 & Evolution 75 Midmark...

Description:Programmable Hand ControlFeatures: Includes: hand control, hand control panel, PC board, top end cap, bottom end cap and coiled cordSpecifications: Fits: Chassis Connector For...

Description:Hand Control PanelSpecifications: Size: 2-1/8" x 5-1/8" Fits: Hand Control For use with Midmark Chair/Table Model: 411 & Evolution 75 Midmark Part Number: 015-0995-00ACTUAL...

Description:Non-Programmable Hand ControlFeatures: Includes: hand control, membrane panel, top end cap, bottom end cap and coiled cordSpecifications: Fits: Chassis Connector For use with...

Description:Hand Control PanelFeatures: Metal backing plateSpecifications: Size: 2-5/32" x 8-9/32" Fits: Hand Control For use with Midmark Chair/Table Model: 405 Midmark Part Number:...

Description:Membrane PanelFeatures: Adhesive backingSpecifications: Size: 2-15/32" x 5-1/16" Fits: Hand Control For use with Midmark Chair/Table Model: 405 Midmark Part Number:...